Firegear 30" Stainless Steel Square Flat Pan Gas Fire Pit Kit with Remote FPB-30SFBSAWS Review
Looking forthe best fire pit kit for your outdoor living room? Firegear 30" Stainless Steel Square Flat Pan Gas Fire Pit Kit with Remote FPB-30SFBSAWS is for you. Avail now here at Flame Authority, your Trusted Dealer!
Theis what allows a fire pit to be operated with control. It also provides the necessary safety featuresand includes a plug-in transformer thatlets youplug it into an outdoor ground-fault 120V/15A outlet. The valve system connects to a fire pit burner. A pilot assembly ignites the burner flameand also is a safety feature as it has a flame sensor. If the unit does not sense any flame, it will try to reignite and if it can't, it will shut down on its own. This system adds safety and convenience to your fire feature.
Disclaimer: Btu listings are based on 7.0WC for Natural Gas and 11.0WC for Liquid Propane (LP) at the burner orifice when usingFiregear Outdoors Burning Spurs.If you use a burner other than a Burning Spur, Btus will vary.
Features
- Stainless steel square flat pan
- Stainless steel burning spur
- AWS fully electronic ignition - 30VDC (Requires 120Vac) - Assembled (GOE-30VDC) power supply, AWS control panel with On/OFF weatherproof switch
- Choose propane or natural gas fuel type
Buy Firegear 30" Stainless Steel Square Flat Pan Gas Fire Pit Kit with Remote FPB-30SFBSAWS today. Available here at Flame Authority, your Trusted Dealer!
Manuals
Need assistance?Talk to an Expert at 1-800-923-4556 or email: [email protected] to get the best-suited Fire Pit Burner Kits for your needs.
Specifications
- Pan Size:30"
- Burner Size:22"
- Gas Type:Natural Gas /Liquid Propane
- BTU:125,000 (36.63kW)
- Depth: 1/16
- Min/MaxOpening orDimension: 28 x 28
- Inside/Outside Dimension: 30OD
- GroundLevel: 18
- SideWall: 36
- CombustibleCeiling: 120
- CombustibleFloor: 18
- Orifice Size# for Natural Gas: 16
- Orifice Size# for Liquid Propane: 31
Gas Pressure
Min. Inlet
- Natural Gas: 3.5 WC ( PSI) (0.87kPa)
- Liquid Propane: 8.0 WC ( PSI) (1.99kPa)
Max. Inlet
- Natural Gas: 14.0 WC ( PSI) (3.48kPa)
- Liquid Propane: 14.0 WC ( PSI) (3.48kPa)
Normal Inlet
- Natural Gas: 7.0 WC ( PSI) (1.74 kPa)
- Liquid Propane: 11.0 WC ( PSI) (2.73 kPa)
Glass and Media
How much Media should I use?
- Lava Rock Only:25 lbs
- Lava Rock as a Base: 25lbs
- Glass (on top of Lava Rock):50 lbs
- Lava Stones (on top of Lava Rock):30 lbs
- Glass Only:110 lbs
Black Lava Rock 10 lb. Bag
Black Lava Rock 40 lb. Bag
Dark Gray Lava Stones
Black Broken Glass
Copper Broken Glass
Crystal Broken Glass
Dark Blue Broken Glass
Light Blue Broken Glass
Seabreeze Broken Glass
Black Reflective Glass
Bronze Reflective Glass
Cobalt Reflective Glass
Copper Reflective Glass
Silver Reflective Glass
Optional Accessories
2 pcs Flexible Frame - FLEXFRAME-SS
- Allows you the flexibility to fill the gap between the fire pit structure and the pan.
- Engineered to protect against the outdoor elements including salt water environment
- Flexible and easy to adapt for round, square, and rectangular fire pits.
3 pcs Flexible Frame -FLEXFRAME-SS3
- Allows you the flexibility to fill the gap between the fire pit structure and the pan.
- Engineered to protect against the outdoor elements including salt water environment
- Flexible and easy to adapt for round, square, and rectangular fire pits.
Paver Control Panel Kit - PAVER-CP-AWS
For use when building fire pit enclosures with SRW block and an AWS burner system. Thermocouple Piloted Safety "TPSI" Burner Systems.SRW bracket kit and extender,Lintel - 12 L x 3 W, Screws and fittings, Tapcon concrete anchors.Paver Vent Kit - PAVER-VENT-4-LNTS
- Stainless Steel Paver Vent Kit with Lintel: includes (2) 3 5/8" tall x 8" wide vents with mounting plate, extension plate extends overall size up to 10" wide and two (2) Tapcon self-tapping concrete anchors and Lintel 12" Long x 3" Wide (20 Gauge Galvanized Steel). Each vent provides 18 square inches of ventilation.
Paver Vent Kit - PAVER-VENT-6-LNTS
- Stainless Steel Paver Vent Kit with Lintel: includes (2) 5 5/8" tall x 8" wide vents with mounting plate, extension plate extends overall size up to 10" wide and two (2) Tapcon self-tapping concrete anchors and Lintel 12" Long x 3" Wide (20 Gauge Galvanized Steel). Each vent provides 18 square inches of ventilation.